PRIMER / SEALER

Primer / Sealer NO. 301

“Transparent-drying ecological primer sealer for the preparation of highly or unevenly absorbent building boards and mineral substrates. Equalises surface absorbency, consolidates the substrate, and ensures optimal adhesion.

Key Features:

  • Dual-action use: Functions as both a base and top primer depending on the dilution ratio.
  • Certified composition: Contains the innovative biogenic binding agent Replebin®, which is emission-free and complies with strict AgBB standards.
  • Ease of application: Easily applied by brush, roller, or spray.

Packaging and Coverage:

  • 1 L – Primer 1:1 ca 10 m² · Sealer 1:3 ca 20 m²

  • 2 L – Primer 1:1 ca 20 m² · Sealer 1:3 ca 40 m²

  • 5 L – Primer 1:1 ca 100 m² · Sealer 1:3 ca 200 m²

Techincal Data:

  • Appearance: Transparent when dry

  • Drying time: Recoatable after 4–6 hours (20 °C, 65% relative humidity)

  • Dilution:

    • For priming the substrate: Dilute 1:1 with water

    • For top priming (Sealer): Dilute 1:2 to 1:3 with water

  • Coats: 1–2 coats depending on substrate absorbency

  • Cleaning tools: Clean immediately with water and soap

  • Shelf life: 24 months in unopened original packaging (in a cool, frost-free place)

GRIP RRIMER

Grip Primer NO. 506

Universal textured grip primer for demanding interior and exterior surfaces. The textured finish provides excellent mechanical adhesion, creating an ideal substrate for finishing plasters, marmorinos, and decorative fills.

  • Performance: Excellent adhesion, breathable, odourless, and low-splatter.

  • Health and Environment: Free from emissions and preservatives, vegan, and certified with the biogenic binding agent Replebin® (complies with AgBB standards).

Packaging and coverage (1 coat):

  • 1 L – ca 12 m² / 5 L – ca 60 m² / 10 L – ca 120 m²

Suitable surfaces: Mineral substrates, plaster, clay, concrete, gypsum board, cement fiberboards, moisture-resistant boards, textured and vinyl wallcoverings, fiberglass mesh, and adhering existing coatings (interior latex paints and varnishes after a compatibility test). The substrate must be dry, clean, sound, uniform, chemically neutral to moderately alkaline, and free of oil, grease, and bleed-through substances.

Application: tir thoroughly before and during use to ensure even distribution of the aggregate. Ready to use. Apply evenly with a roller or brush: 1 coat for interior applications, 2 coats for exterior surfaces and highly absorbent substrates.
Techincal Data:
  • Grain size: Medium grain ( 0.2 mm)<
  • Density: 1,57 kg/L
  • sd value: <0.01 m

  • Drying time: Recoatable after approx. 4–6 hours (at min. 10 °C to max. 35 °C, max. air humidity 85%)

  • Cleaning tools: Immediately with water (add plant-based soap if necessary)

  • Storage: 24 months in sealed original packaging (in a cool and frost-free place)

     

PRIMER PAINT

Primer Paint NO. 505

Universal fine-grained bonding primer for demanding interior and exterior surfaces. Creates an ideal, uniformly adhering substrate for UKU clay and lime paints, decorative fills, stuccos, and marmorinos.

  • erformance: Excellent mechanical adhesion, breathable, odourless, and low-splatter.

  • Health and environment: Emission-free, preservative-free, and vegan. Contains certified biogenic binding agent Replebin® (complies with AgBB standards).

Packaging and coverage (1 coat):

  • 1 L – ca 12 m² / 5 L – ca 60 m² / 10 L – ca 120 m²

Suitable surfaces: Mineral substrates, plaster, clay, concrete, gypsum board, cement fiberboards, moisture-resistant boards, textured and vinyl wallcoverings, fiberglass mesh, and existing well-adhering coatings (interior latex paints and varnishes after a compatibility test). The substrate must be dry, clean, sound, and free of oil, grease, and bleed-through substances.

Application: Stir thoroughly before and during use. Apply with a roller or brush: 1 coat for interior work, 2 coats for exterior applications and highly absorbent surfaces.

Tehnilised andmed
  • Grain size: Fine grain ( 0.05 mm)<
  • sd-value: < 0,01 m
  • Drying time: Recoatable after 4–6 hours (at 10–30 °C, max. air humidity 85%)
  • Density: 1,42 kg/L
  • Drying time: Recoatable after 4–6 hours (at 10–30 °C, max. air humidity 85%)
  • Storage: 24 months in sealed original packaging (in a cool and frost-free place)

  • Cleaning tools: Immediately with water and plant-based soap

How to order?

In order for us to help you choose the best product for your project, please send us the following information:
Description of the substrate to be finished: whether it is a living space, wet room, or façade, size of the surface to be finished. Color selection name, code, or description.